Outdoor Gym Equipment

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated  using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated  using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: GI Pipe and powder coated  using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: GI Pipe and powder coated  using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.

Product Details:

Material: GI Pipe and powder coated 8 using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Z. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.. All open ends of pipe to be closed with plastic caps, base plate      cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated  using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

 GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material:  GI Pipe and powder coated  using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated  using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing  the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: GI Pipe and powder coated  using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

GI Pipe and powder coated  using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: GI Pipe and powder coated  using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: GI Pipe and powder coated  using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/PLASTIC caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: KTR Outdoor Gym GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.

Product Details:

Material: GI Pipe and powder coated using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Product Details:

Material: GI Pipe and powder coated  using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.. All open ends of pipe to be closed with plastic caps, base plate cover shall be made of virgin plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.